Tcp/Ip Port; Secure Protocol Settings; Login Settings; Account Polling Settings - Kyocera TASKalfa 3051ci Operation Manual

Communication Settings

TCP/IP Port

Secure Protocol Settings

Login Settings

Account Polling Settings

6-2
Type a password to a maximum of 32 characters.
Use SNMPv1/v2
Type the Read community name for the device that will be used in
requesting information. Type the Write community name for the device to
be used for changing its configuration. The Read community and Write
community are sent with all SNMP receive and send requests, and must
match the community values on the device.
Use SNMPv3
Type a User name and Password set on the device.
Click the Authentication check box and select the HASH method (MD5 or
SHA1). Click the Privacy check box and select an Encryption method (DES
or AES).
Some operations send a command or command file via logical printer port. The
default logical printer port numbers begin with 9100. The valid range for port
numbers is 1024 to 65535. The number must match the port number of one of
the logical printers defined for a device. Set the port number on the print
device's home page. This procedure varies by model.
Secure Sockets Layer (SSL) is a cryptographic protocol that provides security
for network communications. SSL support varies by model.
Select SSL to use HTTPS for device communication.
Clear SSL to use HTTP for device communication.
In the Login section, you can set user login information. The feature can be set
if at least one selected device supports the user login feature.
For an account device, select Apply same user information as Device
Management (available when user information is stored in Communication
Settings) or Use another user's information. If Use another user's
information is selected, enter the Login user name and Password for the
device.
For some models, select local or device authentication.
The application polls devices at specific intervals to check for account counter
information. When you select a device from an Accounting devices view, you
see the following polling mode:
Account counter polling
Gathers information about the counters for each account, including total
number of prints, copies, FAX, scans, page sizes, duplex pages, and pages
per sheet. Select an interval, a day or date, and time of day.
User Guide