Common Settings Options; Conflicts Options - Kyocera TASKalfa 3051ci Operation Manual

Host

Common Settings Options

Conflicts Options

5-2
When creating a new queue or installing a printer, you can apply some settings
to all selected printer models by using the Common Settings feature. This is for
printing system drivers only.
On the Printer settings page of the Create Queue wizard, click Common
settings, and select available options:
Under Factory Default, select Yes or No. With Yes selected, browse to find
a profile (.KXP), and then click Upload.
Under Plug-ins, select from the available plug-ins to install.
In the Comments box, type your comment.
You can click Open and browse for a .KVP file containing saved
configuration settings for printer drivers.
You can click Save and save current configuration settings in a .KVP file.
You can set resolutions to potential printer conflicts during installation. You can
modify settings for an existing printer, an existing driver, a printer name that
already exists and keep or change a port number. When creating a new queue
or installing a printer, you can select from the following options:
Printer exists:
Keep settings
The current printer settings remain the same and the printer will not be
installed.
Override
The current printer settings will be overridden by the user selected
properties.
Driver exists:
Does nothing
The settings for the existing driver are not changed and a new driver is not
installed.
Upgrade
The driver can be upgraded to a later version.
Share name exists:
Add suffix
The new printer name contains extra characters.
Fail
The new printer is not installed.
No share
The printer is not shared.
Port is not available:
File
The port is set as File.
LPT1
The port is set as LPT1.
Fail
User Guide