Map View - Kyocera TASKalfa 3051ci Operation Manual

View Management

Map View

Importing a Map Background
1
2
3
2-2
Displays the device counters for total printed pages, copier printed pages,
printer printed pages, FAX/i-FAX printed pages, black & white printed pages,
single color printed pages, full color printed pages, total scanned pages,
copier scanned pages, FAX scanned pages, and other scanned pages.
Firmware view
Displays firmware information, including system firmware, engine firmware,
scanner firmware, FAX firmware (Ports 1 and 2), panel firmware, and NIC
firmware version.
Asset view
Displays asset information, including MAC address, serial number, and
asset number.
Map view
Displays printing devices on a background map of your office.
The following default Account views are available:
Accounting devices view
Displays general information and counters for devices that support
accounting.
Accounts view
Displays account information for managed devices, such as counter totals
for print, copy, FAX, and scan.
The following default Host views are available:
Host view
Displays general information about network host computers.
Host driver view
Displays printer drivers installed on host computers.
Host queue view
Displays the printer queues of host computers.
Use Map view to display printing devices on a background map of your office.
Printing device properties can be viewed and managed from Map view. The use
of an office map helps to visualize the location of devices throughout an office.
In Default Views, click Map view. The initial map view displays all devices as
icons against a white background. You can import an image of your office layout
to appear in the background, then click and drag each device icon to its office
location. The map is shared by all map views in the current workspace.
Information about a device can be viewed by moving the pointer over the icon.
You can import an image of your office layout to appear in the map view
background.
In Default Views, select Map view.
In the View menu, click Map > Import map background.
In the Import Map Background dialog box, click Browse to select an image file
(.BMP or .JPG), and then click Open.
User Guide