Installing The Printer Driver In Windows - Kyocera FS-720 User Manual

1. Installing the Printer Driver in Windows

A printer driver is an application that sends documents to the printer. Install the printer driver
from the supplied Product Library CD-ROM. Once installed, a variety of printer settings can
be configured.
In Windows XP or 2000, you must be logged into the system with administrator privileges.
If you connect the USB cable before CD installation, it is strongly recommended that you
cancel the Found New Hardware Wizard and install the software through the CD menu.
Browsing the CD and installing each driver separately is not recommended.
1.
Ensure the power for the computer and printer are turned off.
2.
Ensure that the printer is ready to print (remove packing materials, insert paper and any
toner or ink cartridges) and then connect the computer and printer using either USB, a
parallel cable, or a network cable. For further details on connecting the printer to the
computer, refer to the printer's Operation Guide.
3.
Once connected, power on both devices.
• If the Welcome to the Found New Hardware Wizard dialog box displays, click
Cancel.
4.
Insert the Product Library CD-ROM into the CD drive.
Once the installation program launches, the License Agreement displays.
If the installation program fails to launch after inserting the CD-ROM into the CD drive,
navigate to Windows Explorer, access the CD-ROM, and double-click the Setup.exe file.
Installing the Printer Driver in Windows
1