7 ADVANCED SETTINGS
Changing Refresh Rates
On the [Refresh Rates] tab, you can change the refresh rates for the three items: document notification, printer status, and
print queue.
1
2
1) Item/Refresh Rates List Box
The list box shows the refresh rate settings for the following items:
- Document Notification
- Printer Status
- Print Queue
2) [Restore Defaults]
Clicking on this button restores the default settings of the refresh rates.
3) [Change Rate]
To change the refresh rate, select an item from the Item list and click this button. The dialog box corresponding to the
selected item appears where you can select the desired refresh rate with the slide bar. The refresh rates can be set
within the following ranges:
- Document Notification — 0 second (i.e. no refresh) to 1 minute in 10-second increments. The default is 30
seconds.
- Printer Status — 0 second (i.e. no refresh) to 5 minute in 30-second increments. The default is 1 minute.
- Print Queue — 0 second (i.e. no refresh) to 1 minute in 10-second increments. The default is 10 seconds.
Viewing the Network Address of your printer
On the [Installed] tab, you can check the IP address for each device.
1
2
3
1) Printer Name
This column lists the name of each printer or network fax driver.
2) Port
This column displays the port on your computer to which the printer driver is connected.
3) IP/IPX Address
This column displays the IP/IPX address of the device the printer/network fax driver maps.
4) [Update]
Clicking on this button updates the devices' network address information.
50
Customizing Document Monitor
3
4