Kyocera TASKalfa 3051ci Operation Manual page 46

Device
3
4
5
Setting Network User Properties
1
2
3
4
5
6
7
8
9
10
11
3-23
In the Authentication Settings dialog box, under ID card login settings,
select the Allow keyboard login check box to enable keyboard login. Clear the
check box to disable this feature.
If Allow keyboard login is selected, you can select the Password login check
box to require a password.
Click OK.
An administrator can set network user properties as a device setting. Settings
for user properties vary by model.
In any Device view, select a device.
In the Device menu, click Advanced > Authentication settings.
In the Authentication Settings dialog box, click Network user properties.
In the Network User Properties dialog box, select the Obtain network user
properties check box. Only ASCII characters are allowed in the text boxes.
Type the server name in the Server name text box, to a maximum of 64
characters.
Select the Port number from the list. Available port numbers range from 1 to
65535.
Select the Search timeout (seconds) from the list. The range is from 5 to 255.
Select an Encryption type from the list. The LDAP encryption can be saved to
SSL/TLS, STARTTLS, or it can be set to Off.
Select an Authentication type from the list. You can select from Simple or
SASL.
The device uses the Acquisition of user information settings for search and
retrieval of login user information from the LDAP server.
Type a valid user name in the Name 1 text box, to a maximum of 32 characters.
Type another valid user name in the Name 2 text box, to a maximum of 32
characters.
Type a valid e-mail address in the E-mail address text box, to a maximum of 32
characters.
Click OK.
User Guide