Adding Hosts - Kyocera TASKalfa 3051ci Operation Manual

1
2
3

Adding Hosts

1
2
3
Options for Adding Hosts
KYOCERA Net Viewer 5.3
RPC
On the host and target computers, go to Start > Control Panel > System and
Security > Administrative Tools > Computer Management.
In the Computer Management dialog box, click Services and Applications >
Services.
Right-click Remote Procedure Call (RPC), then click Start.
You can use the Add Hosts wizard to add host computers to the view list.
In the Host menu, click Discovery > Add hosts.
In the Add Hosts wizard, select a method for discovering host computers.
For the selected method, complete the settings. On the Confirm discovery
page, click Finish. If you selected Start immediately on the previous page, the
discovery begins. If you set up a recurring schedule, it is added to the
Scheduled Host Discovery dialog box.
Note: If you are adding hosts for the first time, the Domain Administrator
Login dialog box appears.
You can remove a host by selecting it in Host view and clicking Delete host.
Driver and queue information is also removed. The host is added to the
Excluded Hosts list.
In the Add Hosts wizard, you can select from the following options:
Search current domain
Discover hosts on your network. Click Next to select a discovery schedule
and confirm discovery settings.
Browse Active Directory
Select a location in the Active Directory. Click Next to select a discovery
schedule and confirm discovery settings.
Specify IP address range
Type a starting and ending IPv4 or IPv6 address and click Add to include the
entry in the Selected network segments list. To remove an IP address
range from the Selected network segments list, select the IP address and
click Remove. Click Next to select a discovery schedule and confirm
discovery settings.
Specify IP address
Type an IPv4 or IPv6 address or host name and click Add to include the
entry in the Selected targets list. You can also click Import to use an IP
address list (.CSV or .TXT). To remove an IP address or host name from the
Selected targets list, select the IP address and click Remove. Click Next to
select a discovery schedule and confirm discovery settings.
Quick Start
1-5