Multi-Set; Quick Mode; Custom Mode - Kyocera TASKalfa 3051ci Operation Manual

Quick Mode

1
2
3
4
5
6

Custom Mode

7-1

7 Multi-Set

With Multi-Set, you can send configuration parameters to multiple devices
simultaneously.
With this mode, you can copy settings to one or more device groups. Certain
default settings are automatically applied when you use this mode.
In any Device view, select one or more devices.
In the Device menu, click Advanced > Set multiple devices.
On the Multi-Set Mode page, select Quick mode and then click Next.
On the Device group page, select one or more groups to apply settings to and
then click Next.
On the Source Device page, select a device and then click Next.
Note: If local authentication is on, an administrator must type a login user
name and password in the Login section of the communication settings for the
device. All settings and passwords for the source and destination devices must
be correct in Communication Settings for a successful Multi-Set completion.
On the Confirmation page, you can see a list of your settings.
Note: In Quick mode, the current selections automatically save over the
existing settings on the destination device.
Click Back to make any changes or click Finish.
If the device must be restarted to save settings, a message appears. Click OK
to close.
With this mode, you can customize and copy settings to a single device group.
You can select the settings you want to copy and the method that you will use to
copy settings. The following options may vary on the Settings page depending
upon the destination device.
Device System Settings
Basic device settings including operation panel language, timers, and
security options including panel and interface locks. Some functions may
require the device to be restarted.
User Guide