Kyocera TASKalfa 3051ci User Manual page 81

4.
5.
6.
User Guide
E-mail/Folder
From the drop-down list, select Off, On, or Error Only. If an error occurs during
transmission, Error Only allows a transmission result reported by e-mail and stored
in the folder.
FAX / i-FAX
From the drop-down list, select Off, On, Error Only, or Specify Each Job. If an
error occurs during transmission, Error Only allows a transmission result reported
by e-mail and stored in the folder.
Attach Image
Select either On, Off, or Full Image.
Canceled before Sending
Select either On or Off.
Recipient Format
Select either Name or Destination or Name and Destination.
You can configure settings for Receive Result Report.
FAX/i-FAX RX
From the drop-down list, select Off, On, or Error/Storing in Box. If an error occurs
during reception or received draft is forwarded to FAX Box, Error/Storing in Box
allows a receive result reported by e-mail or report.
Report Type
Select either Print Report or E-mail.
E-mail Address
Enter the e-mail address.
You can configure settings for Job Finish Notice.
Attach Image
Select either On or Off.
You can configure settings for Maintenance Report.
Equipment ID
Enter the equipment ID.
Recipient E-mail Address
Enter the E-mail address to receive the maintenance reports. Use a semicolon (;)
between multiple addresses.
Subject
Enter the Subject of the report.
Maintenance Report Interval
Management Settings
77