Authentication - Kyocera TASKalfa 3051ci User Manual

Management Settings
4.

Authentication

Settings
1.
2.
3.
72
Scanned Page Counts
Shows the total scanned pages of Copy, FAX, and Other Scan.
FAX Counter
Shows the total pages and times of sending faxes.
Counter Reset
Click Reset button to reset the counters.
Click Other Account button or Total Account button to view the result accounting.
Other Account
The total number of copies accounted for other account is displayed.
Total Account
The total number of copies accounted for all account is displayed.
This section includes advanced settings for authentication.
To enable authentication, you must first make the authentication settings.
Click Authentication under Management Settings on the navigation menu. The
Settings page opens.
Click Settings button. The Authentication Settings page opens. This section includes
the following items for configuration.
General
For Authentication, select one of Off, Local Authentication and Network
Authentication from the drop-down list.
Action Settings
For processing unknown ID jobs, select either Permit or Reject. To configure this,
go to the Job Accounting Settings page.
If you have selected Local Authentication in General in step 2 above, switch Local
Authorization On or Off.
If you have selected Network Authentication in General in step 2 above, configure the
following settings.
1. Configure the Network Authentication Server.
Host Name: Enter the host name of the network authentication server. If you use
the host name, you must first specify the DNS server information.
Port Number: Enter the port number of the network authentication server.
Server Type: Select the server type from the drop-down list. When you use ID
Card, select Ext..
Embedded Web Server