Introduction; System Requirements; Accessing The Embedded Server - Kyocera TASKalfa 3051ci User Manual

Kyocera command center rx user guide rev-2013.02
Hide thumbs Also See for TASKalfa 3051ci:
Table of Contents

Advertisement

System Requirements

Protocol
Web browser

Accessing the Embedded Server

1.
2.
User Guide

1 Introduction

Command Center RX (Remote eXtension), which will hereafter be referred to as the
embedded server, refers to the web server that is built into the printing device. It allows
you to verify the operating status of the device and make settings related to security,
network printing, E-mail transmission and advanced networking.
With the embedded server, the administrator can remotely track paper and toner usages
per user and the status of optional equipment installed. The embedded server also
configures device settings, monitors jobs, and manages document boxes and address
books.
The embedded server operates in the following environment. Check the following before
use.
The TCP/IP protocol is installed on the PC.
An IP address is assigned to the printing system.
Microsoft Internet Explorer 7.0 or later (Microsoft Internet Explorer operates on
Microsoft Windows XP/ Vista/7/8, and Microsoft Windows Server 2003/2008/2012.))
Mozilla Firefox 14.0 or later
Safari 5.0 or later (Safari operates on Apple Mac OS X 10.4 or later.)
Google Chrome 21.0 or later
Access the embedded server by entering the printing system's host name or IP address
in a web browser. Obtain the IP address from your network administrator.
Open a web browser.
Enter the device's host name or IP address as the URL. If you use the host name, you
must first specify the DNS server information. For example, http://192.168.10.1.
If the screen "There is a problem with this website's security certificate." is displayed,
configure the certificate. For details, see Certificates on page 68. You can also continue
the operation without configuring the certificate.
The embedded server's home page will be accessed and displayed.
For initial login, use the predefined "Admin" as the Use Name, and "Admin" as the
Password to access all the pages. For initial login, use the predefined Admin as the Use
Name, and Admin as the Password to access all the pages. This is set up internally.
Introduction
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents