Kyocera TASKalfa 3051ci User Manual page 65

User Guide
Settings. To enable this item, select Network Authentication on the
Authentication Settings page under Management Settings.
Select a method for LDAP Security (DSM Scan) from Off, STARTTLS, or SSL/
TLS on the drop-down list. To enable this item, activate SSL on the Network Secu-
rity Settings page under Security Settings.
Other Protocols
This section allows to configure other network protocols. This section includes the
following items for configuration:
1. SNMPv1/v2c: The SNMP protocol provides and transfers management
information within the network environment. Should an error occur such as Add
Paper, the printing system automatically generates a trap, an error message sent
to up to two predetermined trap recipients. To enable the SNMPv1/v2 protocol,
turn this item On. To configure the SNMPv1/v2 protocol, go to the SNMP Settings
page under Management Settings.
2. SNMPv3: The SNMP protocol provides and transfers management information
within the network environment. To enable the SNMPv3 protocol, turn this item On.
To configure the SNMPv3 protocol, go to the SNMP Settings page under
Management Settings.
3. HTTP: HTTP is the protocol to exchange or transfer hypertext between the World
Wide Web and web browsers. To enable the HTTP protocol, turn this item On.
4. HTTPS: HTTPS (Hypertext Transfer Protocol Secure) is a widely-used
communications protocol for secure communication over the Internet. It provides
bidirectional encryption of communications between a client web browser and a
web server. To enable the HTTPS protocol, turn this item On. To enable this item,
activate SSL on the Network Security Settings page under Security Settings.
The current status of the certificate is shown in HTTPS Certificate. To make
advanced settings, click Settings button and select a device certificate. Click
Submit button to finalize settings.
Configure the device certificate on the Certificates page under Security Settings.
This Certificate can be used in common with IPP over SSL and HTTPS.
5. Enhanced WSD: Enhanced WSD is an API to simplify connections to web service
enabled devices, such as Printers, Scanners and File Shares. To enable
Enhanced WSD, turn this item On.
6. Enhanced WSD over SSL: Enhanced WSD (SSL) is a communication security
protocol that provides encryption, authentication, and anti-tampering integrity over
the Internet. To enable Enhanced WSD (SSL), turn this item On. To enable this
item, activate SSL on the Network Security Settings page under Security
Settings. The status of the certificate is shown in Enhanced WSD over SSL
Certificate. To make advanced settings, click Settings button and select a device
certificate. Click Submit button to finalize settings.
Configure the device certificate on the Certificates page under Security Settings.
7. LDAP: The printing system can refer to the address book which is on the LDAP
server as an external address book and assign a FAX number and E-mail address
to the destination. To enables the LDAP protocol, turn this item On. To configure
the External Address Book, go to the External Address Book Settings page
under Address Book. To configure advanced settings, go to Authentication
Settings page under Management Settings.
Select a method for LDAP Security from STARTTLS, SSL/TLS, and Off on either
the External Address Book # or Network Authentication drop-down list. To
enable this item, activate SSL on the Network Security Settings page under
Security Settings.
8. IEEE802.1x: IEEE802.1x is a security protocol that allows login to the secured
networks based on a client certificate. To enable the IEEE802.1x protocol, turn this
item On.
Network Settings
61