Protocol - Kyocera TASKalfa 3051ci User Manual

3.

Protocol

1.
2.
User Guide
PFS: When PFS is turned On (enabled), even if a key is decrypted, the decrypted
key cannot be used to decrypt the other keys generated after the decryption. This
improves the safety, but imposes a heavy burden because of more key-generation
processes.
Diffie-Hekkman Group: When PFS is turned On (enabled), select the Diffie-Hekk-
man Group to use.
Lifetime Measurement: Select Time or Time & Data Size.
Lifetime (Time): Configure the lifetime of IPSec SA in seconds.
Lifetime (Data Size): Configure this item when is Time & Data Size selected as
Lifetime Measurement. Configure the lifetime (data size) of IPSec SA in kilobytes.
Extended Sequence Number: Determines whether a sequence number is 64-bit
extended by IPSec. To execute, select On.
6. Manual: If Key Management Type is set to Manual, configure:
Protocol, Hash, Encryption, SPI Format, SPI for Inbound, SPI for Outbound,
Key Format, Authentication Key for Inbound, Authentication Key for Out-
bound, Encryption Key for Inbound, Encryption Key for Outbound.
Click Submit button to finalize settings.
Click Submit button.
This section includes advanced settings for various protocols used as the
communication procedures and communication protocols.
*: If the settings for the item marked with an asterisk (*) has been changed, you must
restart the machine or the network. To restart the machine, proceed to the Reset page.
Click Protocol under Network Settings on the navigation menu. The Protocol
Settings page opens.
This section includes the following items for configuration.
Print Protocols
Configure the protocols used for printing. This section includes the following items
for configuration:
1. NetBEUI: The NetBEUI protocol allows Peer-to-peer printing (SMB Print). With
this protocol enabled, the printing system is created in Windows Network
Neighborhood. NetBEUI is an enhanced version of the NetBIOS protocol, which is
used for transport of SMB protocol.
Enables or disables the NetBEUI protocol. If NetBEUI is turned On, the name reso-
lution by NetBIOS (NMB) becomes available.
Workgroup: Workgroup represents the workgroup which will appear in Entire Net-
work in "Windows Network Neighborhood."
Comment: You can enter comments here. (This can be left blank.)
2. LPD: The LPD protocol is a printing system designed for printing text or PostScript
files. To enables the LDAP protocol, turn this item On.
3. FTP Server (Reception): FTP is a communications protocol for transmitting files
over a Network. To enables the FTP protocol, turn this item On.
4. IPP: IPP is a protocol which performs transmission and reception of printing data
and configuration of printing systems through TCP/IP networks including the
Internet. To enables the IPP protocol, turn this item On. Enter Port Number
between 1 to 32767. Typically, this should be 631.
5. IPP over SSL: A certificate can be added for communication using the IPP
protocol. To enable the IPP protocol, turn this item On. To enable this protocol,
select On on SSL of the Network Security Settings page. Enter Port Number
Network Settings
59