Kyocera TASKalfa 3051ci User Manual page 28

Device Settings
3.
Set Timer
1.
2.
24
Sleep Level
Select Quick Recovery or Energy Saver. Even if you selected either sleep level,
the machine can recover from the sleep mode when you press any key on the oper-
ation panel or the machine received the print or fax job.
Quick Recovery recovers from the sleep mode faster than Energy Saver.
Energy Saver reduces power consumption even more than Quick Recovery, and
allows sleep mode to be set separately for each function. The time required for the
machine to wake up from the sleep mode and resume normal operation will be lon-
ger than for Quick Recovery.
Alternatively, on some models, the Sleeping page appears on the embedded web
server while the system is engaged in Energy Saver. You can click Start on the
Sleeping page.
If you have selected Energy Saver mode of sleeping, click On of the appropriate
radio button for the interface or device you would like to engage in Energy Saver.
Click Off if you do not want to engage Energy Saver for the interface or device. For
example, if you want the print data received by the network interface always to wake
the machine to continue printing, click Off next to Network.
Auto Sleep
Click Settings button to open the Auto Sleep Settings page. Click On if you want
to use Auto Sleep and click Submit button.
Sleep Timer
Specify the time period in the drop-down list, from 1 to 240 minutes, after that time
period the system enters Auto Sleep Mode.
Low power Timer
Specifies the time from 1 to 240 minutes after which the system enters the low
power mode, where it reduces the power consumption.
Energy Saver Recovery Level
Select Full Recovery, Normal Recovery, or Power Saving Recovery.
After confirming the settings, click Submit button.
Click Energy Saver/Timer under Device Settings on the navigation menu. The Energy
Saver/Timer Settings page opens.
This page allows the following settings:
Auto Panel Reset
Configures the panel to be automatically reset. Activate this setting to open Panel
Reset Timer and specify the time between 5 and 495 seconds after that the panel
will be automatically reset.
Interrupt Clear Time
Embedded Web Server