Fax/I-Fax - Kyocera TASKalfa 3051ci User Manual

3.
Certificate Status
1.
2.

FAX/i-FAX

Common Settings
1.
2.
3.
User Guide
Specifies a name or IP address for the LDAP server. This is required only if Active
Directory which contains Scan Process is unidentical with the server for the network
authentication.
LDAP Port Number
Sets the port number used by LDAP The default port is 389.
Search Timeout
Specifies the timeout time after which a search on the LDAP server expires.
LDAP Security (DSM Scan)
Display whether a LDAP security is available or not. Select the LDAP security from
LDAP Security (DSM Scan) drop-down list on the Protocol Settings page.
Authentication Type
Selects either the Simple or SASL for the authentication type.
Click Submit button.
Click DSM Scan under Function Settings on the navigation menu. The DSM Scan
Settings page opens.
The status of the Root Certificates 1 (to 5) and DSM Client Certificate is shown. Make
settings for the Root Certificate in Certificates page.
This section includes advanced settings for FAX/i-FAX.
If the settings for the item marked with an asterisk (*) has been changed, you must
restart the machine or the network. To restart the machine, proceed to the Reset page.
Click FAX/i-FAX under Function Settings on the navigation menu. The FAX/i-FAX
Settings page opens.
You can configure settings for Transmission. Make the following settings:
1. Local FAX Name: Specifies your FAX system name.
2. TTI: Selects On or Off whether to send the TTI (Transmit Terminal Identifier)
information to the other party.
3. TTI Position: Selects the position of the TTI to be printed on the transmitted
documents.
4. Account as Local FAX Name: Set to On to use the account name as the local
FAX name. The account name appears in place of the local FAX name.
5. Retry Times: Specify the Retry Times from 0 to 14 times.
You can configure settings for Reception. Make the following settings:
1. Media Type: Sets the media type to print the received documents.
2. Use MP Tray: Selects whether or not to include the MP (multi-purpose) tray for
auto media selection when printing received documents. When turned On, the MP
Function Settings
39