Fax / I-Fax > I-Fax > Domain Restrictions > Pop3 Restriction List; Advanced Page; Advanced > Network Protocol Quick Summary/Secure Protocol Quick Summary; Advanced > Protocols > Tcp/Ip > General - Kyocera TASKalfa 8000i User Manual

Kyocera command center rx user guide rev-1.2
Hide thumbs Also See for TASKalfa 8000i:
Table of Contents

Advertisement

FAX / i-FAX > i-FAX > Domain Restrictions > POP3 Restriction
List

Advanced Page

Advanced > Network Protocol Quick Summary/Secure Protocol
Quick Summary
Advanced > Protocols > TCP/IP > General
COMMAND CENTER RX
The section below provides a summary of the items displayed on the POP3
Restriction List page.
Domain Name
Enter the domain names that can be permitted or rejected. You can also
specify the E-mail addresses.
This section includes advanced settings that apply to the machine and is
comprised primarily of advanced network settings.
Always restart this machine after you have completed these settings in order to
properly register the content of those settings in the machine. Refer to
Defaults > Reset
on page 6-6.
A quick summary of the protocols that appear in the Advanced page are as
follows:
• TCP/IP
• NetWare
• IPP
• AppleTalk
• NetBEUI
• SMTP
• POP3
• SNMP v1/v2c
• SNMP v3
• SSL
• IPSec
• IEEE802.1x
The section below provides a summary of the items displayed on the TCP/IP >
General page.
Host Name
Specifies a name for the printing system network component. This name is
also used as the NetBEUI printer name and WSD device name.
IPv4 Settings
• DHCP/BOOTP
Specifies whether or not to automatically obtain an IP address using DHCP or
BOOTP.
• Auto-IP
Settings Pages
Basic >
6-29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents