Using Setup Mode - Fujitsu DL6400Pro User Manual

Using Setup Mode

Using Setup
Mode
<<FUNCTION>>
SAVE&END MENU1
V-ALMNT GAP-ADJ
8-4
Entering setup mode prints the <<FUNCTION>> menu.
MENU2 HARDWRE ADJUST
(GAP-ADJ is printed only with APTC installed.)
Table 8-1 summarizes the setup mode functions.
Table 8–1 Setup mode functions
Function
SAVE&END
MENU1 and
MENU2
HARDWRE
ADJUST
CONFIG
GAP-ADJ
DEFAULT
LIST
SELF-TST
HEX-DUMP
V-ALMNT
To select a function from the <<FUNCTION>> menu, do the
following:
1. Repeatedly press LOCK to position the yellow arrow on the print
head beneath the required function.
2. Press FONT or MENU to select a function. If the function has
items and options, the printer prints the first item and its options.
CONFIG DEFAULT LIST
Purpose
Exits setup mode and saves changes made in
setup mode.
Assigns print features to MENU1 and
MENU2 on the control panel.
Changes hardware options.
Changes print adjustment options.
Changes configuration options.
Sets the head gap, and is displayed when the
printer is equipped with the APTC function.
Resets MENU1 and MENU2 default values
set at shipment.
Prints all currently selected options.
Run the self-test.
Prints hexadecimal data dumps.
Checks and corrects vertical printing
alignment.
SELF-TST HEX-DUMP
User's Manual