Changing MENU1 and MENU2 Options
MENU 1 or MENU2
item
*5
<DC3-CDE>
<CR-CODE>
*2
<LF-CODE>
8-20
Table 8–3 MENU1 and MENU2 options (Continued)
Options
Description
DC1 and DC3 codes are sent from the host system.
ENABLE
Enables DC1 and DC3 codes. Any data received
between DC3 and the next DC1 is ignored.
DISABLE
Disables DC1 and DC3 codes. These codes are then
ignored.
CR ONLY
No line feed is added to a carriage return
CR & LF
A line feed is added to each carriage return.
LF ONLY
No carriage return is added to a line feed. This is the
default when the XL24E emulation is selected.
LF & CR
A carriage return is added to each line feed.
User's Manual