Fujitsu DL6400Pro User Manual page 213

Getting Acquainted with the Control Panel
Form Tear off
feed paper
Tear off paper
and press any button
Form Tear off
feed paper
Reset Micro
printer feed
RESET: Are you sure?
No
Now resetting
Form Tear off
feed paper
E-8
plays the offset from a particular line in the range
(–128 to +127).
The example here indicates an offset of +8/180
inch from the currently selected print line.
Tearing off continuous forms
To tear off continuous forms:
1. Make sure the printer has stopped printing. Press
Line
NEXT DISPLAY repeatedly until the menu
feed
shown at the left appears.
2. Press F2 to advance the forms to the tear-off edge.
The control panel displays the prompt message
shown at the left.
3. Tear off the continuous forms.
4. Press any button on the control panel to retract
Line
the continuous forms back to the original posi-
feed
tion. The original basic menu reappears.
Resetting the printer
To reset the printer:
1. Press NEXT DISPLAY repeatedly until the menu
Line
shown at the left appears.
feed
2. Press F1. The confirmation message shown at the
left appears.
Yes
3. Respond to the confirmation message. Press F3 to
reset the printer. If you do not want to reset the
printer, press F1.
After the printer is reset, the original basic menu
Line
reappears.
feed
User's Manual