Table of Contents
Advertisement
Label
A
C
Print area
C
C
Label
B
*1 Lines may not be fed neatly in the print area of D. A line spacing of 1/6 inch or more pre-
vents characters on adjacent lines from overlapping.
User's Manual
Important:
1. The thickness of the backing sheet must be 0.1 mm (1/254 in) or
less.
2. The thickness of the label must be 0.1 mm (1/254 in) or less.
3. Label adhesion
Labels must satisfy the conditions below and not peel off easily.
Drum diameter:
27 mm (1.06 in)
4. Print area
The figure below shows the print areas on labels.
Fold
Print area
C
Winding drum diameter
Winding angle
Winding time
Ambient temperature
Ambient humidity
Area
Size in mm (in)
A
2.54 (0.1) or more
D
B
6.35 (0.25) or more
C
2.54 (0.1) or more
D
25.4 (1)
B
Labels
27 mm
(1.06 in)
180°
PAPER
SPECIFICATIONS
24 hours
40°C
30% RH
*1
7-11
Advertisement
Table of Contents
