Table of Contents
Advertisement
Feed roller A
User's Manual
6. When loading the new subcassette into the ribbon cassette, check
that the orientation of the new subcassette is correct. After loading
remove the paper tape.
7. Holding the subcassette casing, slide the bottom of the casing to the
right to remove it.
Casing
8. Route the ribbon through paths A and B and insert the reverse
guide.
Ribbon path A
Reverse guide insertion
Ribbon path B
9. Thread the ribbon through the cassette as shown by the dotted line
in the figure. Then raise the casing to remove it.
Casing
Replacing the Subcassette
Paper tape
Ribbon path A
Reverse guide
INSTALLING
THE RIBBON
CASSETTE
Ribbon path B
3-7
Advertisement
Table of Contents
