Fujitsu DL6400Pro User Manual page 72

User's Manual
Important:
1. Paper with its weight in angle brackets < > must be at least 254
mm (10 in) wide.
2. For multipart forms the ream weight of the bottom sheet being
used must be one of the values in parentheses ( ).
3. Characteristics of paper with the number of parts in brackets [ ]
may differ slightly according to the manufacturer and should be
tested carefully before use.
4. The total thickness of multipart paper must not exceed 0.65 mm
(0.025 in).
3. Binding
Paste sheets at the top.
Important:
Pasted portions must be flexible and free of curl.
Paste here.
Front Side
Cut Sheets
PAPER
SPECIFICATIONS
7-9