User's Manual
the bars are aligned. If the bars are offset to the right, repeatedly
press MENU until they are aligned.
The first line in the following example is assumed to be printed
from left to right:
Bars offset to the left
4. Adjust vertical alignment at correspondence speed.
Press LOCK to switch from letter speed to correspondence speed.
Check the bars and adjust as in step (3).
5. Adjust vertical alignment at draft speed.
Press LOCK to switch from report speed to draft speed.
Check the bars and adjust as in step (3).
6. Exit V-ALMNT.
Press ONLINE to exit V-ALMNT and save the new vertical
alignment settings. The printer exits setup mode and goes back
online.
Using Diagnostic Functions
Bars offset to the right
SETUP MODE
8-43