Fujitsu DL6400Pro User Manual page 217

Getting Acquainted with the Control Panel
Enter <Menu>
setup MENU1
Enter <Menu>
setup MENU1
Enter <Menu>
setup MENU1
Offline setup mode
Data will be lost. OK?
No
Func. Item
MENU1 EMULATE
E-12
Enabling or disabling lock mode
Lock mode protects the font selected on the control panel from being
changed by commands from your application software.
To enable lock mode:
1. Press NEXT DISPLAY repeatedly until the menu
<Lock>
shown at the right appears.
OFF
2. Press F3 to switch the option from OFF to ON.
<Lock>
ON
Lock mode remains in effect until the power is
turned off. It is not disabled by initializing or re-
setting the printer or by changing the emulation.
Entering setup mode
You can specify different settings in advance by entering setup mode.
There are many menus in setup mode.
To enter setup mode:
1. Make sure the printer has printed all data. Press
<Lock>
NEXT DISPLAY repeatedly until the menu
OFF
shown at the left appears.
2. Press F1 to enter setup mode. The setup mode
opening message shown at the left appears for
2 seconds.
If unprinted data remains in the buffer, the confir-
mation message shown at the left appears before
the opening message.
Pressing F1 redisplays the original menu (step 1).
Yes
Pressing F3 clears the data and switches the printer
to setup mode (next step).
3. The setup mode initial menu appears.
Option
DPL24C*
User's Manual