Table of Contents
Advertisement
Precautions
7-16
b. When consecutively printing lines that satisfy the specification
in (a), leave an interval of 8 mm (0.3 in) or greater between
lines.
Important:
If the line thickness is 0.5 mm (0.02 in) or less, the interval can be
4 mm (0.16 in) or more.
c. When printing near a paper edge, leave a margin of 8 mm
(0.3 in) or greater.
Top or bottom end of paper
Important:
If the line thickness is 0.5 mm (0.02 in) or less, the interval can be
4 mm (0.16 in) or more.
d. When printing vertical lines in the shaded area in Figure 7-##,
make lines 0.5 mm (0.02 in) thick or less and do not print more
than one line.
Before printing characters in the shaded area in Figure 7-14, use a
sample to check that the characters can be printed.
Leave an interval of 8 mm (0.3 in) or greater.
Leave a margin of
8 mm (0.3 in)
or greater.
User's Manual
Advertisement
Table of Contents
