Sensor Detection - Fujitsu DL6400Pro User Manual

Sensor
Detection
User's Manual
The printer has sensors to detect the following conditions:
• Top cover open
The printer goes offline if the top cover is open.
• Paper out
The printer stops printing when it detects a paper outage, cut-sheet
search, or cut-sheet loading.
• Paper jam
The printer stops printing when it detects a paper jam while paper is
being ejected.
• Print head overheating
The printer prints each line in three passes to protect the print head
when overheating is detected.
• Skewed feeding
When the printer detects skewed feed during loading from the front
table, the printer ejects a cut sheet by reverse line feeding.
• Internal lock switch (not available in some countries)
If the top cover is opened during printing, the printer will
automatically stop, and the remainder of the print data from the line
being printed will be lost. Therefore, do not open the top cover
during printing.
• Jam lever open

Sensor Detection

OPERATING
THE PRINTER
5-13