Fujitsu DL6400Pro User Manual page 212

Form Tear off
feed paper
Page length = 11.0 inch
feed paper
Line count = 002
feed paper
Reset Micro
printer feed
Offset(n/180") = +008
feed paper
User's Manual
Executing a form feed or line feed
To execute a form feed or line feed:
1. Press NEXT DISPLAY repeatedly until the menu
Line
shown at the left appears.
feed
2. Check the direction of the arrow displayed in the
menu. If the arrow points up , paper feeds for-
ward. If the arrow points down , paper feeds
backward. To invert the arrow, press the
ton.
3. Press F1 to feed paper forward (or backward) by
the page. As the paper moves forward (or back-
feed
ward) on the platen, the control panel briefly dis-
plays the page length, as shown at the left.
Press F3 to feed paper forward (or backward) by
the line. As the paper moves forward (or back-
feed
ward) on the platen, the control panel briefly dis-
plays the new line count, with 001 indicating the
first print line (the top-of-form).
The example here indicates that the paper is posi-
tioned to start printing at the second print line.
Executing a micro line feed
To execute a micro line feed (1/180 inch per step):
1. Press NEXT DISPLAY repeatedly until the menu
Line
shown at the right appears.
feed
2. Check the direction of the arrow displayed in the
menu. If the arrow points up , paper feeds for-
ward. If the arrow points down , paper feeds
backward. To invert the arrow, press the
ton.
3. Press F2 to feed paper forward (or backward) by
small increments (or decrements) of 0.14 mm (1/
feed
180 inch). As the paper moves forward (or back-
ward) on the platen, the control panel briefly dis-
Getting Acquainted with the Control Panel
but-
but-
USING THE
LCD/LED TYPE
CONTROL PANEL
E-7