Fujitsu DL6400Pro User Manual page 108

HARDWRE item Options
<CD> IGNORE
DETECT
<==END==>
<<FUNCTION>>
SAVE&END MENU1 MENU2
V-ALMNT GAP-ADJ
<PPR-OUT> CNTONLY
User's Manual
Table 8–4 HARDWRE options (Continued)
Description
The printer ignores CD.
The printer detects CD.
Indicates the end of the HARDWRE item list. Press
FONT to print the first item, <PPR-OUT>. Press
MENU to print the previous item, <CTS> for a serial
interface or <INTRFCE> for a parallel interface. Press
ONLINE to reprint the <<FUNCTION>> menu.
Note:
Underlined options are the factory default settings.
To change printer hardware options, check that continuous forms are
loaded. Then do the following:
1. Enter setup mode.
Place the printer offline and then press FONT and MENU
simultaneously. Wait for the printer to stop printing and check that
the <<FUNCTION>> menu is printed.
HARDWRE ADJUST CONFIG
(GAP-ADJ is printed only with APTC installed.)
2. Select HARDWRE.
Repeatedly press LOCK to position the yellow arrow on the print
head beneath HARDWRE. Press FONT to select HARDWRE and
print the first item and its options.
DETECT IGNORE
3. Select an option.
Press LOCK to move the yellow arrow to the option. Press FONT
to select the option and print the next item.
Important:
To print the previous item, press MENU.
Changing Hardware Options
DEFAULT LIST SELF-TST
SETUP MODE
HEX-DUMP
8-27