Fujitsu DL6400Pro User Manual page 214

<Font> <Qual>
COUR 10 LETTER
User's Manual
Important:
Resetting the printer resets the following:
• Line buffer data
• Input buffer data
• Mechanical positions
• Top-of-form position
The following remain in effect:
• Menu 1 or 2 settings; print font, quality, and pitch; and lock on or
off as set by the control panel
• LOAD ADJ function settings specified in setup mode
• Downloaded data
Changing print font, quality, and pitch temporarily
You can temporarily change the print font, quality, and pitch from the
power-on defaults settings. Any changes you make are active until the
power is turned off. (Use setup mode to change the settings
permanently.)
To change print font, quality, and pitch temporarily:
1. Press NEXT DISPLAY repeatedly until the menu
<Pitch>
shown at the right appears.
10 CPI
The bottom line displays abbreviations of the cur-
rent font, quality, and pitch settings. In the menu
shown here, the current settings are
• Courier 10 font
• Letter-quality print
• 10 characters per inch cpi
2. Look at the arrows displayed in the top line of the
display. If an arrow point up, press
it. In the following steps, it is assumed that the ar-
rows point down.
Getting Acquainted with the Control Panel
to reverse
USING THE
LCD/LED TYPE
CONTROL PANEL
E-9