Changing The Paper Type Settings Of Trays 1 Through 4 - Xerox DocuPrint C2255 User Manual

Changing the Paper Type Settings of Trays 1 through 4

If the paper type setting does not match the actual type of the paper, toner may not fuse
properly to the paper, resulting in poor print quality.
Use the procedure below to change the paper type settings of trays 1 through 4.
Important
• If a paper type setting results in toner not fusing properly on the paper and poor print quality, try changing
to a different paper type setting and printing again. If the paper type setting is for plain paper, for
example, try changing it to bond paper or recycled paper.
Note
• Refer to "Standard Paper and Tested Paper" (P. 92) for information about paper and control panel
settings.
1. On the control panel, press the <Menu>
button to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
3. Press the < > or <OK> button to select.
[Network/Port] is displayed.
4. Press the < > button until [Printer
Settings] is displayed.
5. Press the < > or <OK> button to select.
[Substitute Tray] is displayed.
6. Press the < > button until [Paper Type] is
displayed.
7. Press the < > or <OK> button to select.
[Tray 1] is displayed.
8. Press the < > button until the desired
paper tray is displayed, and then press the
< > button to display its current setting.
The current set value is displayed.
9. Press the < > button until the desired
paper type is displayed.
(Example: Transparency)
10. Press the <OK> button to apply the setting.
102
4 Paper
Menu
LanguageEmulation
Menu
Admin Menu
Admin Menu
Network/Port
Admin Menu
Printer Settings
Printer Settings
Substitute Tray
Printer Settings
paper Type
Paper Type
Tray 1
Tray 1
•Plain
Tray 1
Transparency
Tray 1
•Transparency