Xerox DocuPrint C2255 User Manual page 129

[WSD]
Network/Port
WSD
Setting
Port Status
Port Number
[SOAP]
Network/Port
SOAP
Setting
Port Status
Port Number
WSD
Port Status
WSD
Port Number
Sets whether to enable or disable the WSD port at printer start-up.
• [Enabled] (default)
• [Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is
sometimes automatically disabled. If this happens, either disable unused
ports, or change the memory allocation under [Allocate Memory].
Sets the port number from 1 to 65535.
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/
SOAP/UPnP/WSD ports and Internet services that use HTTP protocol can
share the same port number.
SOAP
Port Status
SOAP
Port Number
Sets whether to enable or disable the SOAP port at printer start-up.
• [Enabled] (default)
• [Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is
sometimes automatically disabled. If this happens, either disable unused
ports, or change the memory allocation under [Allocate Memory].
Sets the port number from 1 to 65535.
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/
SOAP/UPnP/WSD ports and Internet services that use HTTP protocol can
share the same port number.
Description
Description
5.2 Common Menus Setting
129