Table of Contents
Advertisement
Control Panel Operations
The following explains how to print or delete a Sample Set job depending on the proof print
result.
1.
On the control panel, press the <Secure
Print/Sample Set> button.
Note
• In some environments, [Pte. Charge Print] will appear
on the display first.
2.
Press the < > button until [Sample Set]
appears.
3.
Press the < > or <OK> button to select.
A user ID appears.
4.
Press the < > button until the desired user
ID appears.
Note
• The user ID is the ID specified for [User ID] on the
[Sample Set] dialog box of the print driver.
5.
Press the < > or <OK> button to select.
A document name appears.
6.
Press the < > button until the desired
document name appears.
Note
• The document name is the name (of up to 12 bytes)
specified for [Document Name] on the [Sample Set]
dialog box of the print driver.
• When more than one document is stored in the printer,
an [All documents] option is also available.
7.
Press the < > or <OK> button to select.
A screen appears that allows you to specify
whether to delete or save the document
after printing.
Note
• To delete the job without printing, press the <
button to display [Delete], press the <
then press the <OK> button.
8.
When printing the document, use the < >
or <OK> button to select.
A screen to enter the number of copies
appears.
Print Menu
Secure Print
Print Menu
Sample Set
Select User ID
2001.12345678
Select Document
1.Report
1.Report
Print
>
> button, and
Quantity
1 Set(s)
3.6 Printing after checking output - Sample Set -
75
Advertisement
Chapters
Table of Contents
