Xerox DocuPrint C2255 User Manual page 120

[SMB]
Port Status
TransportProtocol
Print Mode
PJL
120
5 Control Panel Settings
Network/Port
SMB
Setting
Sets whether to enable or disable the SMB port at printer start-up.
• [Enabled] (default)
• [Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is
sometimes automatically disabled. If this happens, either disable unused
ports, or change the memory allocation under [Allocate Memory].
Sets the protocol of the transport layer used by SMB.
Either or both of NetBEUI and TCP/IP can be selected.
• [TCP/IP,NetBEUI] (default)
• [TCP/IP]
• [NetBEUI]
Note
• When using TCP/IP protocol, both the printer and client computers must
have IP addresses.
Sets the method of processing data (language emulation).
• [Auto] (default)
After receiving data from a computer, the printer automatically detects its
language emulation and processes the data accordingly. *1 (See P. 171.)
• [PS] [ESCP] [HP-GL/2] [PCL] [TIFF] [KS] [KSSM] [KS5895]
After receiving data from a computer, the printer processes the data with the
selected print language.
• [HexDump]
Allows you to view data received from a computer by printing it in ASCII code
(hexadecimal format). *3 (See P. 171.)
Note
• [KS], [KSSM], and [KS5895] appear when the Korea Font ROM (optional) is
installed.
Sets whether to enable or disable PJL commands that are sent from the
computer.
PJL commands control print jobs, and are required to print jobs using the print
driver. Use of PJL commands allows you to specify the language emulation for
the next job while another language emulation is being processed by the
printer. *5 (See P. 171.)
• [Enabled] (default)
• [Disabled]
SMB
Port Status
SMB
TransportProtocol
SMB
Print Mode
SMB
PJL
SMB
TBCP Filter
Description