Xerox DocuPrint C2255 User Manual page 124

[USB-1 (2.0)]
Port Status
Print Mode
PJL
Auto Eject Time
124
5 Control Panel Settings
Network/Port
USB-1(2.0)
Setting
Sets whether to enable or disable the USB 2.0 (High Speed) port at printer
start-up.
• [Enabled] (default)
• [Disabled]
Important
• When there is not enough memory, either disable unused ports, or change
the memory allocation under [Allocate Memory].
Sets the method of processing data (language emulation).
• [Auto] (default)
After receiving data from a computer, the printer automatically detects its
language emulation and processes the data accordingly. *1 (See P. 171.)
• [PS] [ESCP] [HP-GL/2] [PCL] [TIFF] [KS] [KSSM] [KS5895]
After receiving data from a computer, the printer processes the data with the
selected print language.
• [HexDump]
Allows you to view data received from a computer by printing it in ASCII code
(hexadecimal format). *3 (See P. 171.)
Note
• [KS], [KSSM], and [KS5895] appear when the Korea Font ROM (optional) is
installed.
Sets whether to enable or disable PJL commands that are sent from the
computer.
PJL commands control print jobs, and are required to print jobs using the print
driver. Use of PJL commands allows you to specify the language emulation for
the next job while another language emulation is being processed by the
printer. *5 (See P. 171.)
• [Enabled] (default)
• [Disabled]
Sets the time that data still remaining on your printer is automatically printed
and ejected when data has continuously not been received.
Set the time with the range 5 to 1275 seconds in 5-second increments. *2 (See
P. 171.) Jobs are judged as finished when the next data is not received within
the time set here, after the last data has been received.
• [30 Seconds] (default)
USB-1(2.0)
Port Status
USB-1(2.0)
Print Mode
USB-1(2.0)
PJL
USB-1(2.0)
Auto Eject Time
USB-1(2.0)
Adobe Protocol
Description