Cleaning The Transfer Corotron - Xerox XC 800 Series User Manual

Copier Care

Cleaning the Transfer Corotron

If copies start getting streaks or blotches, the transfer corotron may be
dirty.
34
1. Press the release lever to open the copier.
2. Remove the green transfer corotron
cleaner from inside the copier (on the
right-hand side near the front) and insert it
into the transfer corotron unit.
2. Wipe the corotron wire with the transfer
cleaning tool as shown.
3. Replace the cleaner and close the upper
half of the copier.