Table of Contents
Advertisement
Default Magnification: This feature
allows you to make copies slightly larger
or smaller than the original, or the same
size.
(All models.)
Default Exposure: This feature allows
you to select the default Exposure
mode.
(All models.)
Manual Document Glass Exposure
Adjustment: The copy exposure range
may be adjusted when the copy image
is consistently too light or too dark.
(All models.)
Paper Trail Edge Deletion: The trail
edge deletion can be turned off to
accommodate originals that have print
to the very bottom edge. When Off,
another 4 mm will copy, however the
image quality may deteriorate as it gets
closer to the bottom edge.
(All models.)
Paper Tray Bypass Auto Start: When
enabled, the copier will begin to copy as
soon as paper is fed into the paper tray
bypass.
(Models XC820, XC830, XC865, XC1020,
XC1044, XC1250, and XC1255 only.)
Set Document Feeder Auto Start:
When enabled, the SDF will begin to
copy as soon as paper is placed in the
SDF.
(Models XC865, XC1044, XC1045, and
XC1255 only.)
Feature
Program
Option Number
Number
* Factory Setting
4
0 – 100% *
1 – 99%
2 – 101%
5
0 – Auto
1 – Text
6
0 – +4 steps light
1 – +3 steps light
2 – +2 steps light
3 – +1 step light
4 – Normal *
5 – +1 step dark
6 – +2 steps dark
7 – +3 steps dark
8 – +4 steps dark
7
0 – On *
1 – Off
8
0 – On *
1 – Off
9
0 – On *
1 – Off
Exposure *
29
Advertisement
Table of Contents
