Control Panel - Xerox XC 800 Series User Manual

Control Panel

The control panel has keys and lights that are used to control and display
the conditions of the copier.
1. Exposure Mode: The exposure mode is used to adjust the amount of
background that will be copied. Select the best exposure mode for
your job.
Auto contrast – for originals with a colored background.
Text – for originals that contain mainly text.
Photo – for copying photographs.
Toner Save – lowers the cost of copying by decreasing the overall
copy density. The copy quality is reduced, but it is still very readable
for proofs and rough drafts.
2. Copy Contrast: Press the contrast keys to lighten or darken copies
while in the Text, Photo, or Toner Save settings.
• The copy Lighter/Darker feature is unavailable when Auto contrast
is selected.
• There are 5 contrast settings represented by 3 indicator lights. The
indicators light up one or two at a time to represent the selected
setting. Successive pushes of the keys will change the indicator
lights in successive order. Darkest, normal and lightest settings
are depicted by one light. When 2 indicators are lit, the copy
contrast will be mid point between the darker setting and the lighter
setting.
3. Book Mode (XC830/ XC865/ XC1040/ XC1044/ XC1045/ XC1250/
XC1255): Select book mode when you want to make copies from a
bound document.
4. SDF Misfeed Indicator: This indicator will light when a misfeed
occurres in the SDF.
12