Xerox XC 800 Series User Manual page 7

Safety Notes
Your machine is equipped with an energy saving device to conserve
power when the machine is not in use. The machine may be left on
continuously.
Slots and Openings in the cabinet and in the back and sides of the copier
are provided for ventilation. To ensure reliable operation of the copier and
to protect it from overheating, these openings must not be blocked or
covered. The copier should never be located near or over a radiator or
heat register. This copier should not be placed in a built-in installation
unless proper ventilation is provided.
Never push objects of any kind into the slots of the copier as they may
touch dangerous voltage points or short out parts which could result in a
fire or electric shock.
Never spill liquid of any kind on the copier.
Never remove covers or guards that require a tool for removal. There are
no casual operator serviceable areas within these covers.
Never defeat interlock switches. Machines are designed to restrict
operator access to unsafe areas. Covers, guards, and interlock switches
are provided to ensure that the machine will not operate with covers
opened.
Use of an extension cord with this copier is not recommended or
authorized. Users should check building codes and insurance
requirements if an extension cord is to be used. Ensure that the total
ampere ratings of the products plugged into the extension cord do not
exceed the extension cord ampere rating. Also, make sure that the total
amperage of all products plugged into the wall outlet does not exceed the
outlet rating.
Avoid direct viewing of the document lights. The lamps are bright and,
while not harmful, they may cause an annoying afterimage. Always keep
the document cover closed during operation and storage.
Avoid exposing the drum cartridge to light for extended periods of time.
Do not touch the red photoreceptor. Scratches or smudges that appear on
the photoreceptor will result in poor copy quality and may shorten the
service life.
2