Running-In; Riding - Honda CB TWISTER Owner's Manual

Cb110 owner's manual
Hide thumbs Also See for CB TWISTER:
Table of Contents

Advertisement

FLOODED ENGINE
(Use the start button)
If the engine fails to start after repeated
attempts, it may be flooded with excess fuel.
To clear a flooded engine, turn the ignition
switch to ON, and move the choke lever to
fully OFF (B). Open the throttle fully and
crank the engine for 5 seconds. If the engine
starts, quickly close the throttle, then open
it slightly if idling is unstable. If the engine
does not start, wait 10 seconds, then follow
the starting procedure.
(Use the kickstarter)
If the engine fails to start after several
repeated attempts, it may have become
flooded with excess fuel. To clear the engine,
turn off the ignition switch and move the
choke lever to fully OFF (B). Open the throttle
fully and crank the engine several times with
the kick-starter. Turn the ignition switch to
ON and open the throttle slightly, start the
engine using the kick-starter.
34
RUNNING- IN
Assure your vehicle's future reliability and
performance by paying extra attention to
how you ride during the first 500 km
(300 miles).
During this period, avoid full-throttle starts
and rapid acceleration.

RIDING

Review vehicle safety (pages 1-6) before
you ride.
Make sure the side stand is fully retracted
before riding the vehicle. If the stand is
extended, it may interfere with control
during a left turn.
1.
After the engine has been warmed up,
the vehicle is ready for riding.
2.
While the engine is idling, pull in the
clutch lever and depress gearshift
pedal to shift into 1
(low) gear.
st

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents