Honda CB TWISTER Owner's Manual page 67

sprockets must be in good condition,
or the new replacement chain or
sprocket will wear rapidly.
4. Lubricate the drive chain (page 58).
5. Pass the chain over the sprockets and
join the ends of the chain with the
master link.For ease of assembly, hold
the chain ends against adjacent rear
sprocket teeth while inserting the
master link.
The masterlink is the most critical part
affecting the security of the drive chain.
Master links are reusable, if they
remain in excellent condition, but it is
recommended that a new master link
retaining clip be installed whenever the
drive chain is reassembled.
Install the master link retaining clip so
that the closed end of the clip will face
the direction of forward wheel rotation.
6. Adjust the drive chain (page 56) and
rear brake pedal free play (page 15).
(1) Retaining Clip ¼fjVs f ua x fDyi½
FRONT AND REAR SUSPENSION
INSPECTION
Refer to the safety precautions on page 40.
1. Check the front fork assembly by
locking the front brake and pumping
the fork up and down vigorously.
Suspension action should be smooth
and there must be no oil leakage.
59