Honda CB TWISTER Owner's Manual page 78

2. Remove the left side cover (page 29).
3. Open the fuse holder (1).
4. Pull out the old fuse and install a new
fuse. The spare fuse (2) is attached to
the fuse holder.
5. Install the fuse holders and left side cover .
Removal
Pull
Installion
(3) Fuse ¼¶;w t ½ (4) Clips
70
¼fDyIl½
Do not try to open the clips, which prevent
fuse from coming out;
you could bend them and cause poor contact
with the new fuse. A loose fuse could cause
damage to the electrical system and even
start a fire.
If you do not have a replacement fuse with
the proper rating for the circuit, install one
with a lower rating.
NOTICE
Replacing a fuse with one that has a higher
rating greatly increases the chance of
damage to the electrical system.
If the replacement fuse of the same rating
burns out in a short time, there is probably
a serious electrical problem on your vehicle.
leave the blown fuse in that circuit and have
your vehicle checked by your Honda dealer.