Honda CB TWISTER Owner's Manual page 82

BRAKE/TAIL LIGHT BULB
1. Open the seat .
2. Remove the inspection cover plate by
removing the screws (1).
3. Remove the taillight holder by turning
counterclockwise.
4. Remove the bulb from bulb holder by
pressing in & turning counterclockwise.
5. Install a new bulb in reverse order of
removal.
(1) Screws ¼LØw t + ½
(2) Bulb ¼cYc½
74
FRONT/REAR TURN SIGNAL BULB
1. Remove the turn signal lens (1) by
removing the screws (2).
2. Slightly press the bulb (3) and turn it
counterclockwise.
3. Install a new bulb in the reverse order
of removal.
(1) Turn signal lens
¼VuZ flxuy yS a l ½
(2) Screw ¼LØw ½
(3) Bulb ¼cYc½
CLEANING
Clean your vehicle regularly to protect the
surface finishes and inspect for damage,
wear, and oil or brake fluid leakage.