Honda CB TWISTER Owner's Manual page 84

4. After cleaning, rinse the vehicle
thoroughly with plenty of clean water.
strong detergent residue can corrode
alloy parts.
5. Dry the vehicle start the engine, and
let it run for several minutes.
6. Test the brakes before riding the
vehicle. Several applications may be
necessary to restore normal braking
performance.
7. Lubricate the drive chain immediately
after washing and drying the vehicle.
Braking efficiency may be temporarily
impaired immediately after washing the
vehicle.
Anticipate longer stopping distance to avoid
possible accident.
76
Finishing Touches
After washing your vehicle, consider using
a commercially-available spray cleaner/
polish or quality liquid or paste wax to finish
the job. Use only a non-abrasive polish or
wax made specifically for vehicle or
automobiles. Apply the polish or wax
according to the instructions on the
container.
Removing Road Salt
The salt contained in the road surface
freezing prevention medicine which a road
was sprayed with in winter, and the seawater
becomes the cause which rust occurs in.
Wash your vehicle by the following point after
it runs through such a place.
1. Clean the vehicle using cool water
(Ref. page 75).
Do not use warm water.
This worsens the effect of the salt.