Honda CB TWISTER Owner's Manual page 66

Lubrication
Lubricate every 1,000 km (600 miles) or
sooner if chain appears dry.
To clean and lubricate the chain visit your
nearest Honda Dealer/Service Center.
R 428HBS-118
NOTICE
Improper maintenance of chain can lead
to premature wear of sprockets and
chain drive.
58
Removal and cleaning:
When the drive chain becomes dirty, it should
be removed and cleaned prior to lubrication.
1. With the engine off, and carefully
remove the master link retaining clip
(1) with a pair of pliers. Do not bend or
twist the clip. Remove the master link.
Remove the drive chain from the
vehicle.
2. Clean the drive chain in high flash-point
solvent and allow it to dry. Inspect the
drive chain for possible wear or
damaged rollers, loose fitting links or
otherwise appears unserviceable.
Never use petrol or low flash point
solvents for cleaning the drive chain. A
fire or explosion could result.
3. Inspect the sprocket teeth for possible
wear or damage. Replace if necessary.
Never use a new drive chain on badly
worn sprockets. Both chain and