Honda CB TWISTER Owner's Manual page 36

Installation
For seat installation, insert the prongs into
the recess under the frame cross member
and then push down on the rear of the seat.
Be sure the seat is locked securely in
position after installation.
HELMET HOLDER
The helmet holder is located below the seat.
Remove the seat. Hang the helmet on the
holder hook (1).
Install the seat and lock it securely.
28
WARNING
!
Riding with a helmet attached to the
holder can interfere with the rear wheel
or suspension and could cause a crash
in which you can be seriously hurt or
killed.
Use the helmet holder only while
parked. Do not ride with a helmet
secured by the holder.
(1) Helmet holder hook ¼gS Y es V g®YMj gq d ½