Shifting - Honda CB TWISTER Owner's Manual

3. Slowly release the clutch lever and at
the same time gradually increase engine
speed by opening the throttle.
Coordination of the throttle and clutch
lever will assure a smooth positive start.
4. When the vehicle attains a moderate
speed, close the throttle, pull in the
clutch Lever and shift to 2
raising the gearshift pedal. This
sequence is repeated to progressively
shift to 3 and 4
rd
5. Coordinate the throttle and brakes for
smooth deceleration.
6. Both front and rear brakes should be
used at the same time and should not
be applied strongly enough to lock the
wheel, or braking effectiveness will be
reduced and control of the motorcycle
be difficult.
gear by
nd
(top) gears.
th

SHIFTING

Proper shifting can prevent damaging the
engine and transmission.
UPSHIFTING
The upper limit speed of each gear is shown
in gear range (page 10).
Upshift to a higher gear before exceeding
the upper limit speed.
Upshifting at speeds higher than the upper
limit speed can cause damage to the engine.
35