Honda CB TWISTER Owner's Manual page 69

necessary. See your Honda dealer for this
service
(1) Speedometer cable ¼LihMks e hVj ds c y½
(2) Tab ¼VS c ½
(3) Front axle nut ¼Ýa V ,Dly uV½
(4) Front axle shaft
¼Ýa V ,Dly "kk¶V½
Installation Notes:
• Reverse the removal procedure.
• Position the wheel between the fork legs
and insert the front axle from the right
side, through the right fork leg and
wheel hub.
• Make sure that the lug (5) on the fork
leg is contacting the lugs on the
speedometer gear box.
• Tighten the front axle nut to the
specified torque.
Front axle nut torque:
54 N.m (55 kgf.m, 40 lbf.ft)
• After installing the wheel, apply the
brake several times and then check if
the wheel rotates freely. Recheck the
wheel if the brake drags or if the wheel
does not rotate freely.
61