Honda CB TWISTER Owner's Manual page 80

BRAKELIGHT SWITCH ADJUSTMENT
Refer to the safety Precautions on page 40.
Check the operation of the brakelight switch
(1) at the right side behind the engine from
time to time.
Adjustment is done by turning the adjusting
nut (2). Turn the nut in the clockwise direction
(A) if the switch operates too late and in
counterclockwise direction (B) if the switch
operates too soon.
(1) Brakelight switch ¼cz s d ykbV fLop½
(2) Adjusting nut
¼,MtfLa V x uV½
72
BULB REPLACEMENT
Refer to the Safety Precautions on page 40.
The light bulb becomes very hot while the
light is ON, and remain hot for a while after
it is tusrned OFF. Be sure to let it cool down
before servicing.
Do not put finger prints on the headlight
bulb, as they may create hot spots on the
bulb and cause it to break.
Wear clean gloves while replacing the bulb.
If you touch the bulb with your bare hands,
clean it with a cloth moistened with alcohol
to prevent its early failure.
• Be sure to turn the ignition switch OFF
when replacing the bulb.
• Do not use bulb other than those
specified.
• After installing a new bulb, check that
the light operates properly.