Front Wheel Removal - Honda CB TWISTER Owner's Manual

If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
(5) Lug
¼yx½

Front wheel removal

(Drum type)
1. Raise the front wheel off the ground by
placing a support block under the engine.
2. Remove the speedometer cable (1) by
pushing the tab (2).
62
3. Remove the front brake adjusting nut
(3) and remove the front brake cable
(4) from the brake arm (5).
4. Remove the front axle nut (6).
5. Remove the front axle shaft (7) and
the wheel.
(1) Speedometer cable ¼LihMks e hVj ds c y½
(2) Tab ¼VS c ½
(3) Brake adjusting nut ¼cz s d ,MtfLa V x uV½
(4) Front brake cable
¼Ýa V cz s d ds c y½
(5) Brake arm ¼cz s d vkeZ ½
(6) Front axle nut ¼Ýa V ,Dly uV½
(7) Front axle shaft
¼Ýa V ,Dly "kkQV½