Replacing The Lcd Front Panel - Packard Bell EasyNote NS11HR Service Manual

Replacing the LCD front panel

Tools you need to complete this task:
Screws removed during this task:
www.packardbell.com
Phillips #0 screwdriver
Flat screwdriver
•
3 black M2.5×6 (bay cover)
•
1 black M2×3 (hard drive)
•
1 black M2.5×6 (optical drive)
•
by A in step 8 of the
•
frame/palm rest module - base side) - indicated by B in
"Replacing the keyboard"
•
1 black M2×3 (system board)
•
4 black M2.5×6 (LCD panel hinges)
•
2 black M2.5×5 (LCD front panel)
To replace the LCD front panel:
1
Complete the steps in
2
Remove the LCD panel assembly by performing
"Replacing the LCD panel assembly"
3
Remove the screw covers from the corner of the LCD front panel.
or Non-marring plastic scribe
5 black M2×3 (keyboard frame - top base side) - Indicated
"Replacing the keyboard"
procedure on
"Preparing the notebook" on page
procedure on
13 black M2.5×6 (keyboard
step 8
page 53
37.
steps 2 –
procedure on page 76.
page 53
of the
12 of the
79